CASE 1021F Wheel Loader

Starting with crawling up grizzlies at aggregate distribution sites, to truck loading at concrete production locations for highway projects, the CASE 1021F wheel loader is built specifically for these jobsite tasks. These loaders effortlessly balance on the highest banks, hold the tightest turns, and grab the largest loads while providing cooler engine operating temperatures, up to 10 percent better fuel efficiency, and more torque for tractability.

Bucket Capacity: 4.2 – 4.4 m³
Engine: 320 hp / 239 kW

Add to wishlist

Description
Case Brand

PRODUCTIVITY (50 meter distance cycle)

Considering density at 1,8 t/m³ and 100% fill factor 52 cycles/hour including 5 minute break

230 m³/h or 410 t/h 52 loading cycles/h with standard bucket 4.4 m³ or 7.9 ton

ENGINE

Make	FPT turbocharged engine F2CFA614C-E019 with Tier 2 (EU stage II regulations)
Cylinders	6
Max power SAE J1995	239 kW / 320 hp @1800 rpm
Maximum torque SAE J995	1479 Nm @1100 rpm

TRANSMISSION

Forward speeds	7-13-19-38 Km/h
Reverse speeds	7-13-27 Km/h

AXLES AND DIFFERENTIAL

Front	ZF type MT-L3115-II
Rear	ZF type MT-L3105-II
Rear axle total oscillation	26°

BRAKES

Service brake	Maintenance free, self-adjusting wet 4-wheel disc brakes
Area	0.74 m²/hub (L3115-II axle) or 0.54 m²/hub (L3105-II axle)
Parking brake	Disc brake on transmission activated from the cab cluster
Area	0.74 m²/hub (L3115-II axle) or 0.54 m²/hub (L3105-II axle)

HYDRAULICS

Valves	Rexroth Closed-center, load sensing hydraulic system Main valve with 3 sections
Steering	The steering orbitrol hydraulically is actuated with priority valve
Type of pump	Tandem Variable displacement pump (352 l/min @2000 rpm)
Control type	Pilot control with single joystick or two levers

CAPACITIES

Fuel tank	459 usable liters
Cooling system	57 liters
Engine oil	26 liters
Hydraulic oil	Tank: 134 litres, total system: 250 liters
Transmission oil	45 liters

CAB AND CONTROLS

Protection against falling objects (FOPS)	ISO EN3449
Protection against roll over (ROPS)	ISO EN13510

NOISE AND VIBRATION

Interior noise	Lpa = 79 dB (A) in compliance with standard ISO 6396:2008
Exterior noise	Lwa = 108 dB (A) according to European Directive 2000/14/EC
Vibrations	air-cushioned seat MSG 95A/732

ELECTRICAL SYSTEM

Batteries	24V Batteries 2 x 12V
Alternator	65A

BROCHURES

Download

Case Brand

CASE is here for you

You can take pride in the name on your CASE machine. It’s backed by nearly two centuries of productivity and performance. CASE Construction Equipment and Tin Quang Group are here for you, not only when you buy the machine, but also after you put 1,000 or 10,000 hours on it.

More than that, you can count on CASE andTin Quang Group for the ultimate ownership experience — productive equipment, expert advice, genuine CASE parts and prompt service.