Manitou MT-X 1033 Mining

  • Max. capacity: 3300 kg
  • Max. lifting height: 9.98 m
  • Maximum outreach: 7.15 m
  • Overall length to carriage: 4.93 m
  • Length to face of forks: 4.93 m
  • Overall width: 2.25 m
  • Overall height: 2.30 m
  • Wheelbase: 2.69 m
  • Ground clearance: 0.44 m
  • Overall cab width: 0.89 m
  • Tilt-up angle: 12 °
  • Tilt-down angle: 114 °
Add to wishlist
The MT-X 1033 Mining telehandler, with stabilizers, has been specially manufactured for use in the mines in our production facilities.
Versatile with accessories such as tire clamps, jib, forks and baskets, it is designed for the safety of the operator and his environment.
With a lifting capacity of 3.3 t., its boom can reach up to 10 m (loading height) and 12 m (working height): it is the ideal solution for underground galleries.
It is factory equipped with dedicated mining equipment that facilitates the work of the operators for any type of application inside the mine.
  • SAHR safety brakes
  • Daily brake test system
  • Emergency steering
  • Protection grids
  • External emergency stop
  • Pack of 3 cameras
  • Reinforced wiring harness and fuse box
  • Directional lights
  • Reflective strips
  • Maintenance is simplified by easy access to filters and components in the engine cover.
  • Safety, productivity and profitability
  • Max. capacity: 3300 kg
  • Max. lifting height: 9.98 m
  • Maximum outreach: 7.15 m
  • Breakout force with bucket: 5330 daN
  • Overall length to carriage: 4.93 m
  • Length to face of forks: 4.93 m
  • Overall width: 2.25 m
  • Overall height: 2.30 m
  • Wheelbase: 2.69 m
  • Ground clearance: 0.44 m
  • Overall cab width: 0.89 m
  • Tilt-up angle: 12 °
  • Tilt-down angle: 114 °
  • External turning radius (over tyres): 3.66 m
  • Unladen weight (with forks): 7745 kg
  • Overall weight: 7745 kg
  • Tires type: Pneumatic
  • Standard tires: Alliance 400/80 – 24 – 162A8
  • Forks length / width / section: 1200 mm x 125 mm x 45 mm
  • Lifting: 6.70 s
  • Lowering: 5.40 s
  • Extension: 13.60 s
  • Retraction: 8.70 s
  • Crowd: 2.70 s
  • Dump: 2.30 s
  • Engine brand: Perkins
  • Engine model: 1104D-44 TA
  • Number of cylinders / Capacity of cylinders: 4 – 4400 cm³
  • Engine power (Hp/kW): 101 Hp / 74.50 kW
  • Max. torque / Engine rotation: 410 Nm @ 1400 rpm
  • Drawbar pull (Laden): 9100 daN
  • Transmission type: Torque converter
  • Number of gears (forward / reverse): 4 / 4
  • Max. travel speed: 27 km/h
  • Max. travel speed (may vary according to applicable regulations): 27 km/h
  • Parking brake: Manual
  • Service brake: Oil-immersed multi-discs on front & rear axles
  • Hydraulic pump type: Gear pump
  • Hydraulic flow / Pressure: 106 l/min-250 bar
  • Engine oil: 11 l
  • Hydraulic oil: 128 l
  • Fuel: 120 l
  • Noise at driving position (LpA): 76 dB
  • Noise to environment (LwA): 104 dB
  • Vibration on hands/arms: < 2.50 m/s²
  • Steering wheels (front / rear): 2 / 2
  • Drive wheels (front / rear): 2 / 2
  • Safety / Cab certification: Standard EN 15000 / Cabin ROPS – FOPS level 2
  • Controls: JSM

Technical Sheet

Sản Phẩm Cùng Loại

error: Content is protected !!
Contact