MT-420 X H is the most compact telescopic handler within the Construction range. With its all-terrain structure and its great versatility, it allows you to safely perform your various handling operations: place, load / unload, move a load, dump materials, raising operators, prepare the soil, erect load-bearing elements … Enjoy the multifunctional use to save time and improve productivity of your site. The MT-X 420 telescopic handler makes your job easier in tight spaces on rough terrain, muddy or irregular ground.
- Max. capacity: 2000 kg
- Max. lifting height: 4.35 m
- Maximum outreach: 2.65 m
- Breakout force with bucket: 1886 daN
- Overall length to carriage: 3.58 m
- Overall width: 1.49 m
- Overall height: 1.97 m
- Wheelbase: 2.13 m
- Ground clearance: 0.24 m
- Overall cab width: 0.79 m
- Tilt-up angle: 12 °
- Tilt-down angle: 116 °
- External turning radius (over tyres): 2.98 m
- Unladen weight (with forks): 4190 kg
- Overall weight: 4260 kg
- Tires type: Pneumatic
- Forks length / width / section: 1200 mm x 125 mm x 45 mm
- Lifting: 5 s
- Lowering: 3.50 s
- Extension: 4.80 s
- Retraction: 3 s
- Crowd: 3.30 s
- Dump: 2.70 s
- Engine brand: Kubota
- Engine norm: Stage IIIA
- Max. fuel sulphur content: 500 ppm
- Engine model: V2607
- Number of cylinders / Capacity of cylinders: 4 – 2615 cm³
- Engine power (Hp/kW): 49 Hp / 36 kW
- Max. torque / Engine rotation: 170 Nm @ 1600 rpm
- Drawbar pull (Laden): 2850 daN
- Transmission type: Hydrostatic
- Number of gears (forward / reverse): 2 / 2
- Max. travel speed: 25 km/h
- Max. travel speed (may vary according to applicable regulations): 25 km/h
- Parking brake: Automatic Negative Hand-brake
- Service brake: Disk brake on the cadran shaft
- Hydraulic pump type: Gear pump
- Hydraulic flow / Pressure: 78 l/min-235 bar
- Engine oil: 10.20 l
- Hydraulic oil: 70 l
- Fuel tank: 60 l
- Noise at driving position (LpA): 76 dB
- Noise to environment (LwA): 104 dB
- Vibration on hands/arms: < 2.50 m/s²
- Steering wheels (front / rear): 2 / 2
- Drive wheels (front / rear): 2 / 2
- Safety / Cab certification: Standard EN 15000 / ROPS – FOPS cab (level 1)
- Controls: JSM
Tiếng Việt











